TE636WSlim Weather Forecaster with Indoor/ Outdoor Temperature and HumidityUSER MANUAL
NewMoonWaningCrescentFirstQuarterWaxingGibbousFullMoonWaningGibbousLastQuarterWaningCrescentCHANGING PRESSURE AND ALTITUDE UNITS• Press MODE as needed
IconStatusSearching for the signals from the remote sensorCorresponding remote sensor signal received successfullyNo signals received for over 1 hourR
Indicator displayedCOMWETDRYTemperature RangeHumidityRangeShows current condition20°C to 25°C(68°F to 77°F)40%RH-70%RHIdeal relative humidity and temp
ICON Atomic Time Reception StrengthUndefined data(Flashing)No Reception for the past 24 hoursWeak signal, but can be decodedStrong signal• The atomic
CLOCK ALARMSThere are two time alarms – Weekday alarm (W) and Single day alarm (S) - and one Ice Warning Alarm (PRE-AL).• If Weekday (W) alarm is acti
IssueMain unitRadio Controlled Time signal is not receivedCannot locate remote sensorCannot change the channelData does not match data on the main uni
SPECIFICATIONSMain UnitIndoor TemperatureOperating range: 23.0°F to 122.0°F (-5°C to +50°C)Temperature resolution: 0.2°F (0.1°C)User-selectable (°F or
FCC STATEMENTThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause h
STANDARD WARRANTY INFORMATIONThis product is warranted by Meade Instruments Corp. (MIC) to be free of defects in materials and workmanship for a perio
Meade Instruments Corp.27 HubbleIrvine, CA 92618 U.S.A.© 2011 Meade Instruments Corp. All Rights Reserved.All user manual contents and information are
INTRODUCTIONThank you for selecting a Meade Instruments Weather Forecaster. This device combines precise time keeping, monitoring and displaying of cu
INSTALLATIONCommunications between the main unit (receiver) and the remote sensor (transmitter) is wireless. This allows you to greater flexibility in
REMOTE TEMPERATURE AND HUMIDITY SENSOR FEATURES• Remote data transmission to the main unit via 433 MHz frequency• Single transmission channel• Case ca
PLACEMENT• The remote sensor should be placed under eaves or a similar location with free air circulation, sheltered from direct sunlight and extrem
FRONTREARAJKLBCGHDIFE6
A. WEATHER FORECAST/ PRESSURE windowB. TEMPERATURE/ HUMIDITY windowC. CLOCK windowD. DOWN button • Select the next available mode• Press and hold for
K. BATTERY COMPARTMENT • Requires two (2) CR2032 lithium cell batteriesL. TABLE STAND• When placing the main unit on the table or other horizontal sur
PRESSURE OPERATIONThe pressure window displays: current barometric pressure, sea level pressure, and weather forecast. The information contains a numb
Comments to this Manuals