Meade TS33F-M User's Guide download pdf (Page 29)

RFXtrx Version 5.06 page 29 / 39

7.7. MDREMOTE

This MDREMOTE has been tested.

http://www.ultraleds.co.uk/mini-dimmer-with-rf-remote-control-12-or-24v-dc-12a-maximum.html

The RFXtrx433 can only transmit MDREMOTE commands.

Procedure to find the ID of the MDREMOTE:

In RFXmngr enable the X10 protocol and enable “Undec on”

Press a button on the MDREMOTE remote.

The undecoded message contains the ID in the 2

and 3

byte, for example:

------------------------------------------------

Packettype = UNDECODED RF Message

UNDECODED NEC:20AF6801D1

The 2 bytes after 20 is the MDREMOTE ID, in this example AF 68

7.8. Aoke relay

The Aoke 12V DC - 315MHz or 433.92MHz 1 channel relay is available at www.aliexpress.com

store No.110758. Indicate clearly the required frequency when ordering!

The 1 channel learning relays can be used, see the picture below.

For example, for 1 relay:

http://www.aliexpress.com/store/product/DC12V-1CH-wireless-switch-remote-control-system-

remote-control-switch-for-guard-door-window-curtain/110758_936534863.html

or for 6 relays:

http://www.aliexpress.com/store/product/ak-DC12V-1CH-RF-rocker-switch-livolo-switch-system-in-

china-j-12a-108d-smart-house/110758_1007306574.html

The jumper next to the learning button defines to operating mode:

Open = momentary

1-2 = toggle mode

2-3 = on/off mode (to be used with the RFXtrx)

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 38 39

No comments

Meade TS33F-M User's Guide Page 29