Meade TE827W User Manual download pdf (Page 5)

INSTALLATION

The Meade Instruments Semi-professional weather station (TE827NLW) operates at 433MHz radio frequency, so no wire

installation is required between the main unit (receiver) and the remote weather sensors (transmitters).

The remote weather sensors include a thermo-hygrometer (temperature and humidity) sensor, anemometer (wind sensor) and a

rain gauge (rain sensor). All data measured by these remote sensors is transmitted to the main unit wirelessly, with the operating

range up to 328 feet (100 meters) in the open area.

The Anemometer and rain gauge must be placed outdoors to measure weather elements.

Remote thermo-hygrometers can be placed indoors or outdoors, depending on the location where the temperature and humidity

are to be measured. If you intend measuring outdoor temperature and humidity, place the remote sensor outdoors, preferably

not in direct sunlight.

Note: It is critical to assemble and power up all of the remote weather sensors BEFORE setting up the main unit.

Note: It is critical to power up and test communication between all of the weather sensors and the main unit BEFORE

permanently mounting them outside.

BEFORE YOU BEGIN

• We recommend using alkaline batteries for the remote weather sensors and the main unit when temperatures are above

32°F (0°C). We recommend using lithium batteries for the remote weather sensors when temperatures are below 32°F (0°C).

• Avoid using rechargeable batteries. (Rechargeable batteries cannot maintain correct power requirements).

• ALWAYS install batteries in the remote weather sensors before the main unit.

• Insert batteries before first use, matching the polarity in the battery compartment

• Remove protective plastic screen from LCD display (if any).

• During an initial setup, place the main unit close to the remote weather sensors.

• After reception is established (all of the remote readings will appear on the main unit’s display), position the remote sensors

and the main unit within the effective transmission range of up to 328 feet (100 meters). Ideally they should be placed within

the line of sight of the main unit. See placement tips in the user manual for each remote weather sensor separately.

• Transmission range may be affected by trees, metal structures and electronic appliances.

• The main unit must be placed indoors.

• The effective operating range may be influenced by the surrounding building materials and how the receiver (main unit) and

transmitters (weather sensors) are positioned.

• Place the remote weather sensors so that they face the main unit (receiver), minimizing obstructions such as doors, walls, and

furniture.

Note: When the temperature falls below freezing, the batteries in the outdoor remote weather sensors may have reduced

voltage supply and a shorter effective range. We recommend using lithium batteries at temperatures of 32°F (0°C)

and below.

IMPORTANT: Make sure that the remote weather sensors are easily accessible for cleaning and maintenance.

We recommend cleaning the remote weather sensors periodically, as the dirt and debris may affect sensors accuracy.

THERMO-HYGROMETER SENSOR

FEATURES

• Remote data transmission to the main unit via 433 MHz signal

• 328 feet (100 meters) transmission range without interference

• LCD display of measured temperature and humidity

• Three (3) transmission channels selection

• Case can be wall mounted using built-in hanger

• Up to three T-H sensors per station are permitted

THERMO - SENSOR

A. LED INDICATOR

• Flashes once when the remote sensor transmits a reading to the main unit.

• Flashes twice when battery power is low.

B. BATTERY COMPARTMENT

Holds two AA-size batteries

1 2 3 4 5 6 7 8 9 10 ... 25 26

Comments to this Manuals

No comments

Meade TE827W User Manual Page 5

Comments to this Manuals

Related products and manuals for Weather stations Meade TE827W