Meade TE688W User Manual

TE688WWireless Weather Forecaster with Indoor/ Outdoor Temperature and HumidityUSER MANUAL

OPERATIONOnce the main unit is powered, the display will show all available LCD segments for a moment.IMPORTANT: All of the display functions will be

The unit is designed to measure pressure changes at your specific location, when LOCAL barometric pressure is selected. Information for programming yo

VIEWING PRESSURE AND ALTITUDE INFORMATIONTo view pressure or altitude information, press MODE button. The display will alternate between the sea level

After selecting the Pressure Window, press and hold ALARMbutton to toggle the bar chart between the sea level pressure with a word “PRESSURE” displaye

OPERATION• To select the indoor/ outdoor temperature and humidity mode, press UP (? ) or DOWN (? ) until the IN icon flashing with a beep s

VIEWING MAX/MIN AND MINIMUM READINNGSPress the MEM/ HISTORY button recalling:• Current temperature and humidity• Minimum temperature and humidity• Max

Icon Atomic Time Reception StrengthUndefined dataNo Reception for the past 24 hoursWeak signal, but can be decodedStrong signalThe WWVB tower icon on

TIME ZONE• Press MODE button once to select hour and minutes with the day of the week display.• Select the Time Zone by pressing and holding UP ( ?

• Adjust the hour using UP ( ? ) or DOWN ( ? ) buttons• Press ALARM button again. The minute digits will flash• Adjust the minutes using UP (? ) or DO

TROUBLESHOOTINGCheck here before contacting customer service.Issue Symptom SolutionMain unitUS Atomic Time signal is not receivedPlace unit by the win

INTRODUCTIONThank you for selecting a Meade Instruments Weather Forecaster. This device combines precise time keeping, monitoring and displaying of cu

SPECIFICATIONSMain UnitIndoor TemperatureOperating range: 23.0°F to 122.0°F (-5°C to +50°C)Temperature resolution: 0.2°F (0.1°C)User-selectable (°F or

RF range: Maximum 100 feet (30 meters) Temperature transmission cycle: approximately 45 seconds Low battery indicatorWall-mount or Table standPowerMai

DECLARATION OF CONFORMITYWeName: Meade Instruments Corp.Address: 27 Hubble, Irvine, CA 92618 - 4209declare that the productProduct No.: TE688WProduct

STANDARD WARRANTY INFORMATIONThis product is warranted by Meade Instruments Corp. (MIC) to be free of defects in materials and workmanship for a perio

Meade Instruments Corp.27 HubbleIrvine, CA 92618 U.S.A.© 2011 Meade Instruments Corp. All Rights Reserved.All user manual contents and information are

INSTALLATIONCommunication between the main unit (receiver) and the remote sensor (transmitter) is wireless. This allows you to greater flexibility in

• Though the remote sensors are weather-resistant, they should be placed away from direct sunlight, rain or snow. The optimal location for the rem

BATTERY INSTALLATIONNOTE: When the temperature falls below freezing point 32°F (0°C), battery voltage will drop which may result in reduced the transm

MAIN UNITThe main unit measures indoor temperature and humidity readings and temperature and humidity from up to three remote sensors location (outsid

JEFDGIHABCKL7

A. WEATHER FORECAST/ PRESSURE windowB. TEMPERATURE/ HUMIDITY window C. CLOCK windowD. DOWN (? ) button • Select the next available mode• Press and hol

H. UP (? ) button • Press to select the next available mode• Increase the parameters • In time with seconds display mode, press and hold for 2 secon