Meade LNT Instruction Manual download pdf (Page 38)

Two-Star Alt/Az Alignment

Two-Star Alignment requires some knowledge of the night sky. AutoStar provides a database

of bright stars and two stars from this database are chosen by the observer for alignment.

Note:

If you choose “Easy Align,” Autostar will choose the two alignment stars.

Initialize your telescope, as described on page 18.

2. With "Align: Automatic" displayed, press one of the Scroll keys until "Align: Two Star"

displays. Press ENTER.

3. Set the telescope in the home position (

Fig. 13):

• Level the tripod head.

• Unlock the Dec. Lock (

6, Fig. 1) and level the optical tube by lining up

“0°” on the Dec. Setting Circle (

11, Fig. 1) with the molded triangular Dec Pointer

(located immediately under

neath the Dec Setting Circle).

• Re-lock the Dec. lock to a firm feel.

• Unlock the R.A. lock (

9, Fig. 1) and turn the optical tube horizontally until it points

North. Re-lock the R.A. lock.

. "Select Star" displays. AutoStar then displays a database of stars for the observer to

choose from. Use the Scroll keys to scroll to a star on the list that you wish to align upon.

Select a star that you can easily locate in the night sky. Press ENTER.

4. The telescope slews to the star. Use the Arrow keys to move the telescope until the star is

centered in the eyepiece. Press ENTER.

5. Repeat procedure for the second alignment star. The telescope is aligned and you are now

ready to use AutoStar's GO TO capabilities for a night of observing.

One-Star Alt/Az Alignment

One-Star Alignment requires some knowledge of the night sky. AutoStar provides a database

of bright stars. One-Star Alignment is identical to Two-Star Alt/Az: Alignment (see “TWO-STAR

ALT/AZ ALIGNMENT,” above), except only one star from this database is chosen by the

observer for alignment.

IMPORTANT NOTE: The accuracy of One-Star Alt/Az Alignment, unlike the Two-

Star and Easy (Alt/Az) Alignment procedures, depends on how well the observer

levels the telescope and how close to North the telescope is pointed when setting

the Home Position (

Fig. 13). Because the other methods use two stars to align

upon, they are more precise than One-Star Alignment.

Browse

This menu allows you to search the database for objects with certain parameters, much like a

search engine. "Edit Parameters" lets you set various parameters for the search, and "Start

Search" activates the search. A typical search might be performed as follows:

1. Select "Browse" from the Object menu. Press ENTER. "Browse: Start Search" displays.

2. Press one of the Scroll Keys and "Browse: Edit Parameters" displays. Press ENTER.

3. "Edit Parameters: Largest (mins)" displays. "Mins" stands for arc-minutes. Press ENTER.

"Largest (mins)" and a v

alue displays. Using the Number keys, enter a size in arc-minutes.

AutoStar will search for objects

up to this size and no larger. Press ENTER.

5. "Edit Parameters: Largest (mins)" displays again. Press the Scroll Down key. "Edit

ameters:

Smallest (mins)" displa

Enter the v

alue for the smallest size of an object

that A

utoStar will search f

or in the database

Continue with "Brightest," Faintest," and

"Minimum Elevation," using the procedure described in steps 3 and 4.

6. After "Minimum Elevation," "Object Type" displays. Press ENTER." "+Black Hole"

displays.If you do

not wish wish to have "Black Holes" in your search, press ENTER and

the "+" changes to a "–." Press the Scroll Down to scroll to the next item. "+Diffuse Nebula"

displays. Continue to scroll through the list and press ENTER if you wish to change the "+"

to a "–" or vice-versa.

7. After you have scrolled to the last item on the "Object Type" list, press MODE twice and

the Scroll Down key once. "Browse: Start Search" displays. Press ENTER. "Start Search:

Next" displays. Press ENTER. AutoStar searches the database and displays the first object

that matches the search par

ameters y

ou ha

e entered.

Use the scroll k

ys to displa

information about the object. Press MODE and "Start Search: Next" displays again. Press

ENTER and the ne

xt item matching the par

ameters displa

ys. Repeat this procedure to

display all the objects.

Press MODE repeatedly to lea

e this men

Fig. 13: Alt/Az Home Position.

North

0°

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 59 60

Comments to this Manuals

No comments

Meade LNT Instruction Manual Page 38

Comments to this Manuals

Related products and manuals for Telescopes Meade LNT